Accidental Shifts in Meaning

Accidental Shifts in Meaning Accidental Shifts in Meaning Accidental Shifts in Meaning By Mark Nichol Words often slowly change their meanings over time and sometimes, as in the case of fulsome, flip-flop but occasionally popular culture inadvertently puts them on the fast track to transformation. Movies and television shows introduce or popularize new senses for words all the time, but there are at least two cases in which filmed entertainment unintentionally created new senses for words that supplanted the original usage. In the first instance, it was actually the print version of The Maltese Falcon, by Dashiell Hammett, in which the author dared to have protagonist Sam Spade refer to a member of antagonist Kasper Gutman’s entourage as â€Å"your gunsel.† That word, probably from the Yiddish term for â€Å"young goose,† originally was hobo slang for a boy in a sexual relationship with an older man. Lore has it that Hammett intended that meaning and inserted it in the original short story to put one over on a prissy magazine editor. When screenwriter and first-time director John Huston adapted Hammett’s tale for the big screen supposedly by merely transcribing the story’s dialogue he retained the term, and the movie-going public, like the editor, assumed that the word refers to a gunman. Ever since then, writers searching for an evocative slang term for a hired gun have passed the viral error on. A similar transmogrification occurred with the word nimrod, a generic reference to the biblical character of that name, who in the Good Book is referred to as â€Å"a mighty hunter.† How, then, did the word become a synonym for jerk or idiot? We have none other a personage (or, more accurately, a rabbitage) than Bugs Bunny to thank for this significant shift in meaning. In a Looney Tunes cartoon featuring Bugs’s fumbling nemesis Elmer Fudd as a hunter on the rabbit’s trail, the carrot-chomping coney sardonically refers to Fudd as a nimrod insulting him by derisively comparing him to a biblical personage renowned for his hunting skills. Apparently, later generations of Looney Tunes fans who hadn’t kept up with their Scripture picked up on Bugs’s attitude without understanding the ironic allusion, and the word acquired a new meaning, while its original sense faded into the background. The moral of these stories? If you come across a mystery word in your reading and are tempted to employ it in your own writing, first be sure you understand its implications. Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Vocabulary category, check our popular posts, or choose a related post below:50 Redundant Phrases to Avoid75 Synonyms for â€Å"Talk†40 Words Beginning with "Para-"

Relevance of Philosophy Essays

Relevance of Philosophy Essays Relevance of Philosophy Essay Relevance of Philosophy Essay In this essay the challenge is to shown the relevance of philosophy to 21st century manufacturing. As philosophy is not a new concept there is a wide and defervesce range of ideas (on everything that existed and does not yet exist). The people who study philosophy and deal with such matters must have at one stage put forward some thoughts on manufacturing and even engineering in general. Philosophy comes from the Greek for love of wisdom, giving us two important starting points: love (or passion) and wisdom (knowledge, understanding). Philosophy sometimes seems to be pursued without passion as if it were a technical subject like mathematics. Philosophy must come from some passion for the ultimate goal to be achieved: a reliable, accurate understanding ourselves and our world. Many think philosophy an idle, academic pursuit, never amounting to anything of practical value. The works of ancient Greek philosophers, ask the same questions which philosophers ask today. Doesnt this mean that philosophy never gets anywhere and never accomplishes anything? Philosophy is relevant as it makes us think about where we have come from, where we are at present and where we are going to in the future. The study of philosophy is usually conducted in one of two different ways: the systematic/ topical method and the historical/ biographical method. Both of these have their strengths and weaknesses and it is often easier to avoid focusing on one to the exclusions of the other, at least whenever possible. There are many different areas of philosophy which have relevance to manufacturing and will have relevance in the future. Philosophy is the study of the fundamental  nature of existence, of man, and of mans relationship to existence. Some areas of study in philosophy are logic, ethics and epistemology (knowledge, ways of knowing) to name but a few important that are relevant to manufacturing. In this essay I hope to discover the link and the importance of philosophy in relation to manufacturing in the 21st century. Main body The main areas in which manufacturing are influenced by philosophy is ethics, logic and epistemology. Logic  is the study of  reasoning. Logic is used in most intellectual activities, but is studied primarily in the disciplines of philosophy,  mathematics engineering, and  computer science. Logic examines general forms which  arguments  may take which forms are valid, and which are fallacies. It is a type of  critical thinking. The field of ethics (or moral philosophy) involves systematizing, defending, and recommending concepts of right and wrong behaviour. Philosophers today usually divide ethical theories into three general subject areas: met ethics, normative ethics, and applied ethics Knowledge is about how things work and why they work and that’s what engineering and the sciences set out to do. Manufacturing is a by product of knowledge. These areas can be viewed from many philosophical points. And the different areas which have relevance to manufacturing can be put into three main branches and several sub branches. These main three are Epistemology, Logic and Ethics and some sub branches of the three main relevant branches to manufacturing, economic, technological mathematic, social and rational argument. The relevance of philosophy to manufacturing goes back long before the industrial revolution and even further back then the roman’s but to the first philosopher Pythagoras. These topics will be discussed in more detail later. Ethics or moral philosophy This is the branch of philosophy which seeks to address questions about morality that is, about concepts such as good and bad, right and wrong, justice and virtue. Anyone who has read Aristotle’s Ethics and has read modern moral philosophy must realise the great contrasts between them. The concepts which are prominent among the moderns seem to be lacking, far in the background, in Aristotle. Most noticeably, the term ‘moral’ itself, which we have by direct inheritance from Aristotle, just doesn’t seem to fit in its modern sense into an account of Aristotelian ethics. Aristotle distinguishes virtues as moral and intellectual. This area of philosophy is a broad area of study and is very relevant to everybody in normal day life. We take for granted the morals we live by and the morals of others, this too can be true for ethical practices that take place in manufacturing. Ethics are used by every company and business as bases for running their organisation such as fair trade, quality of product and quality of working environment. Some examples of ethics that show how important it is to consumers that companies have morals include: Fair Trade In the case of fair trade ethics has changed the way trade is done and the way people are treated in the process. In the past number of years important social changes have occurred with ethics an example of simple ethic in fair trade would be the production of coffee beans. Companies in recent years have begun to buy fairly bought produce where the producers benefit. As most of the producers are poor farmers. But because of the moral changes that have taken place in the past twenty years things have improved before the change in attitude the companies bought the product at low prices for big plantation owners and the poor suffered because of it. Quality of Product The role of ethics in quality of product we can take a very recent example and it is very much manufacturing example that of Toyota with the stricken of the accelerator pedal. The company is calling back thousands of cars for repair; this will cost a lot of money. And why its being done well the company has a moral obligation to produce a product fit for use. The ethics behind leaving defective products in us by consumers it could cause many incidences and maybe fatalities. The ethics that Toyota will abide by. Will cost the company a lot of money but may save the company on the long run. Companies who didn’t solve their problems. i. e. the car company Lancia who had a rust problem, which crippled the company in the end. And Toyota could fall a similar fate and begun bankrupt if not carful. It can be said that it is not ethics that is making Toyota recall all these cars but money. That unfortunately that is a pessimistic view and one would hope that Toyota is doing it for the right reasons over the value of reputation and money. Quality of Working Environment Quality of working environment is the final scenario. There have been many changes in the way people work and the place in which they work in as most working environment can be very dangerous places. Since the start of the industrial revolution high fatalities have occured due to machines with little or no safety aspects, have been recorded and it was due to companies disregarding safety of workers to make high profits. It may not be as big an issue today in the western world but to poorer more undeveloped countries where workers are still being neglected-ethics will play a role to improve he working environment and show manufacturing in a better light, now and in the future. Ethics is the bases of why good judgment is made so as to maintain and improve society. In a manufacturing sense morals can be a corner stone in changing work practices in industry. It can be a tool for progress in the future. The moral obligation to all is to be just and right, the phrase â€Å"Do no harm† can be an important to manufacturing and life in ge neral. Thomas Hobbes had stresses the importance of peace and security. With ethics in mind he said; there is no place for industry, because the fruit thereof is uncertain: and consequently no culture of the earth; no navigation, nor use of the commodities that may be imported by sea; no commodious building; no instruments of moving and removing such things as require much force; no knowledge of the face of the earth; no account of time; no arts; no letters; no society† And then follows the description of life under such conditions made so by repeated quotation that I refrain from quoting it still again. Where morals prevail peace can be seen. Peace and security, however, including secure property rights and the attendant opportunities to create and accumulate wealth, permit â€Å"commodious living†, which is Hobbes’s term for economic development. In the three examples it can be seen where ethics has played a part in changing the mind set of people and companies in the past few decades. It may not be ethics which was the catalyst for these changes but it is the way things are changing for the better. Hobbes had a point even if it was a bit extreme; there is room for good if people give it a chance and do the right thing. Logic Logic is the study of reasoning. And reasoning typically focuses on what makes reasoning efficient or inefficient, appropriate or inappropriate. Logic is the corner stone of science and mathematics which in turn play a vital role in engineering. It is one of the oldest areas of philosophy going back to Aristotle. Along with Aristotle some key figures in the study of logic were Bertrand Russell, Charles Sanders Peirce and Immanuel Kant. These men made many points on the area of logic As like ethics, logic is a wide area of study. This is important to us in our every day existence. Logic is what we use to solve from our most basic problems to the kind of problems that change the world socially, economically, technologically and mathematically to name but a few ways. Logic can be broken down into two parts inductive reasoning and deductive reasoning. Inductive reasoning is where a set of facts are given and from those facts a conclusion can be got from it an example of this in is a jigsaw puzzle all the parts are there but the pieces must be put together to see the full picture. On the other hand deductive reasoning is quiet different while inductive reasoning all the pieces are to be seen at once deductive reasoning gets it answer on a logical sequence of events, example of deductive reasoning is where a problem is set out but there is only one piece of information to work on and from that another piece of information is discovered until a logical sequence is established and an answer is reached like a detective solves a crime. Logic is the tool to solve any problem or argument which may arise by using the types of reasoning. And with this in mind logic will play a part in the future of manufacturing because without the use of logic the problems of the future won’t be solved and manufacturing will not progress. Epistemology Philosophy is largely based on known knowledge and epistemology is a study of knowledge. Descartes defines knowledge in terms of doubt. While distinguishing rigorous knowledge and lesser grades of conviction, Descartes writes: â€Å"I distinguish the two as follows: there is conviction when there remains some reason which might lead us to doubt, but knowledge is conviction based on a reason so strong that it can never be shaken by any stronger reason. † [Stanford, 2010] According to Bertrand Russell in regards to Epistemology, he says â€Å"we could be familiar with objects in two ways: knowledge by acquaintance and knowledge by description. He also thought that we could only be acquainted with our own sense data and that everything else we had to know through reasoning. It set out to answer â€Å"what distinguishes true (adequate)  knowledge  from false (inadequate) knowledge? This question translates into issues of scientific methodology: how can one develop theories or models that are better than competing theories. There is many areas which knowledge can be broken down into these main areas are Ratio nalism, Scepticism Rational Knowledge Rationalism Mathematics and geometry are examples of abstract truths which are known with certainty, even though the physical illustrations of these truths may vary. An early example was the Greek philosopher Plato who stated that ideas have an existence independent of human minds. These independently-existing ideas are the only reality in the universe since they are absolute and unchanging. Valid knowledge comes then when the mind grasps these ideas. Another famous philosopher was the Frenchman Rene Descartes who went through a period of scepticism in his life and then came to the conclusion that only ideas which were clear and distinct to the mind represented valid knowledge â€Å"Objections to Rationalism: . There is no agreement among philosophers or cultures about so-called self-evident ideas. Supposedly self-evident ideas have often been rejected at later times in history. 2. Self-evident ideas provide no knowledge about the world. Though sense experience may not be certain, it provides us with information which is as reliable as we need. The fact that a belief is not absolutely certain should not disqualify it for knowledge. Why not say t hat something is  known  as long as there is no good reason to doubt it? Of course, that might mean that occasionally we would have to admit that what we thought we knew was something that we really didnt know. So what? † [tamu, 2010] Scepticism This is the view that questions whether valid or reliable knowledge is ever attainable by a human being. Some sceptics stated that nothing can be known. Other sceptics stated that they did not know whether knowledge was possible; they suspended judgment on the issue. Some of the common examples used by sceptics are the illusions and deceptions of our senses. Others point to the complexity of any experience and ask how you can know what is the essence or real nature of the things you are experiencing. Empiricism This is the view that valid knowledge comes only through the five senses. Aristotle held the view that whatever was in the mind was first in the senses. Rene Descartes  (1596-1650) He claims, unless we know first whether our belief itself is justified. To determine whether our beliefs are justified, we have to be able to trace them back to a statement, belief, or proposition that cannot be doubted. Such a proposition could provide the firm foundation on which all subsequent beliefs could be grounded; it would guarantee that all subsequent claims based on it would be true. In order to identify an ultimate principle of truth on which all other knowledge can be based, Descartes develops a method that suspends our confidence in what we have been taught, what our senses tell us, what we think is obviousin short, in regard to everything we know. In order to determine whether there is anything we can know with certainty, he says that we first have to doubt everything we know. Such a radical doubt might not seem reasonable, and Descartes certainly does not mean that we  really  should doubt everything. What he suggests is that, in order to see if there is some belief that cannot be doubted, we should temporarily pretend that everything we know is questionable. Since sense experience is sometimes deceiving, it is obvious to Descartes that  a posteriori  claims (e. g. , that this milk tastes sour or that suit is dark blue) cannot be the basis for claims of knowledge. We do not know that what we experience through our senses is true; at least, we are not certain of it. So the best thing to do is to doubt our senses. Likewise, we cannot be sure that we really have bodies or that our experience of the world in general can be trusted; after all, we might be dreaming the whole thing. Next, we cannot even be sure that mathematical propositions such as 2+3=5 or that triangles always have three sides are true because some evil power might be deceiving us to think such things, when it is possible that even propositions that seem evident to us as true might themselves be really false. But even if an evil genie deceives us about all other beliefs, there is one belief that we cannot be mistaken about, and that is that we are thinking. Even to doubt this is to affirm it. Thinking proves that we exist (at least as minds or thinking things, regardless of whether we have bodies). The body is not an essential part of the self because we can doubt its existence in a way that we cannot doubt the existence of the mind. We have a great inclination to believe that there are physical objects that are external to the mind. But since only those objects known in terms of mathematical propertiesnot those imagined by use of the sensescan be known clearly and distinctly, the only knowledge we can have of such objects is in terms of mathematical, quantifiable physics. The only real knowledge we can have, then, is of things understood as functions of laws of physics. The objects we  see  are not the objects we  know, because what we know is intelligible only in terms of the clarity and precision of the formulae of physics. Information provided by the senses cannot therefore be the basis of knowledge. [tamu, 2010] Kant Immanuel Kant (1724-1804) was a German philosopher who attempted to combine rationalism and empiricism. It is called the form and matter epistemology. A statue can have a form such as Abraham Lincoln and a matter such as marble; you need both a form and a matter to have a statue. So in knowledge you need a form, which are categories of the mind,  and matter which are the data of sensatio ns. You need both of these to have knowledge. It is similar to wearing rose-colored glasses. You have visual sensations and they are coloured by the glasses. Of course with the mind you cannot take of your glasses. Knowledge is an incredibility powerful tool which has created great nations and pushed the boundaries of science and technology to new areas. The quotation from Sir Francis Bacon (1561-1626) said that â€Å"knowledge is power† and that has always been the case since the dawn of civilisation, knowledge has been a part of every major advancement. Knowledge has a big part to play in manufacturing, it is an integral part of all advancement without the constant need for knowledge through research and other means it would be impossible to make major achievement. The different areas which have been discussed can be seen as different way we can go about solving difficult situation and problems. Manufacturing will need to conform to these different methods of thinking in the future. Conclusion Philosophy can be shown to have many areas some of which have been covered throughout this essay. The areas which have been covered are relevant to manufacturing in ways that show philosophy as a key component to running a lucrative and sustainable operating line. Philosophy has a lot of points to make; its relevance to manufacturing can be used as a tool for advancement in the future in areas such as Ethics * Companies treatment of small producers * Quality of products produced for consumers * The working environment Ethics has a role to play in changing these for the better and will have a maintaining a standard in future productions, especially in third world countries where companies have taken advantage of their workers yet do not pay a moral price. Logic The study of reasoning logic can be found at the core of engineering and manufacturing in general. It is a corner stone in which there are couple of ways of resolving a problem. The two main types are * Inductive * Deductive These two methods of solving apply to certain manufacturing dilemmas depending on the individual situation. A logical sequence of steps to gain the solution in which a process i. e. a production line is established by taking the correct logical sequence for the line to work effectively. Logic has a vital role in the way manufacturing process are carried out, without which there would be ciaos, void of efficiency, continuity and general order. Epistemology Epistemology is the study of knowledge and the ways of knowing. It schools of thought from which theories have sprung can be divided in the categories. * Rationalism The view of using absolute truth which is known with certainty is rationalism. Breaking knowledge down into its simplified core elements to revel the truth. * Scepticism This is seen where a theory is put forward and is then questioned. Many theorists maintain that some knowledge can never been known in its entirety or factually. It is questioning until a hypothesis or theory is validated to their satisfaction. * Empiricism Using the five senses to gain knowledge, most natural form of collection of information as we do it every day unknowingly. In the future the ideas and views of philosophy will have a significant part to play in manufacturing and engineering in general. As it has had an important role to play in the past. Manufacturing can be broken down into many different areas and this is due to philosophy and the thinking required by the different schools of thought in the related areas. As all area have a knock on effect on each other, i. e. logic can change the methodology significantly. We now realise the importance of philosophy in every day manufacturing although it might not appear obvious but under the surface of manufacturing processes is detrimental to efficient, cost effective, and ethic practices in the work place. References [Stanford, 2010] http://plato. stanford. edu/entries/descartes-epistemology/ [tamu, 2010] http://philosophy. tamu. edu/~sdaniel/Notes/96class15. html

Biology Article Example | Topics and Well Written Essays - 500 words - 1

Biology - Article Example The study of microbiology also highlights the problems with regard to the biodegrading of toxic and other minerals present in the environment that are harmful to the plants, animals, apart from human beings. While biotechnology seeks to solve the problems faced in medicine, agriculture etc., and the microbiology is its branch that helps in the identification of the virus or fungie responsible for such problems. The study of microbes helps us to study the reactions that occur in higher organisms. Therefore, while studying the molecular level genetic engineering, the contribution of microbes in research for biochemical and molecular genetics has been increasing remarkably....(microbiology) This pertains to the study of cells and the method of interaction of cellular components that are responsible to promote life processes. While the study of this topic would include the synthesizing of DNA and RNA, it also helps in the research to find the mechanism for differentiation of a single-celled egg into a complex multi-cellular organism. For studying the concepts of biotechnology or genetic engineering, the detailed knowledge of cell and molecular biology is very important. The biologists concerned with this relevant topic use its results and findings to study the principals of protein synthesis, enzymology, organelle structure and function and cell ultra-structure, among other areas. Speaking in simpler terms the molecular biology is the science that transcribes the genetic material into RNA and then translates it into protein, as this helps us to know the mysteries surrounding this field in a better manner. As most of the work in microbiology can be quantified, we are now witnessing the off-shoot of this in bioinformatics and computational biology as some call these as the interface of this particular topic and the computers....(molecular) Biological techniques have been taken to such heights that

Christian Church Art Architecture Essay Example | Topics and Well Written Essays - 750 words

Christian Church Art Architecture - Essay Example In fact, this is the building that I will attempt to effectively 'dissect' in order to ascertain to what extent it has been constructed from an amalgam of various styles as well as attempting to identify the particular styles in question. First, let us look at the details behind the design and construction of this building. The actual construction of this building began in 1851 and reached its completion some six years later. However, due to extensive damage, the building was reconstructed in the 1920s although the reconstruction remained true to the original design. The building was designed and built under the direction of Fr. John Cambiaso who was a Jesuit originating from Lyon in France. We learn that Fr. Cambiaso actually learnt the practice of architectural design during his stay in Spain and this gives us some clues behind his particular use of certain elements within the design. Because as we see from our first view of the church from the outside (fig. 1) it distinctly remind s us of those buildings that were produced under the Islamic and Moorish influences that were so predominant in the seventh and eighth centuries, especially in countries such as Persia, Egypt and Spain.(1) 2 Fig. 1 As we can see, the Moorish elements of this building are typical of how the designers let their imaginations play a little with both patterns and forms to produce designs that were almost dreamlike. However, another building that comes to mind here (especially with regards to the second level arches) is the Palace of the Doges of Venice that was built in the 14th century. It is from this that we learn that our particular church was in reality designed in a Venetian Gothic Style. It is then that we begin to notice the elements of this building that are so essential to the Gothic. In the words of the art historian Heinrich Wolfflin, we notice how in the gothic "†¦the vertical movement streams upwards without check and dissolves playfully at the top" (Wolfflin 60). We k now that the Gothic architects were particularly fond of intricate ornament and tracery and here we see examples of how, again in the words of Wolfflin, "[The Gothic] developed in the direction of ever slimmer and more pointed shapes, to a point of extreme exaggeration" (75). In fact, the Venetian Gothic Style was effectively revived during the 19th century. This revival was mainly down to the work of the British architectural critic, John Ruskin especially his book entitled The Stones of Venice (2). It was Ruskin who spoke of the lightness and soaring spaces of this style and, once inside the church, this is the first thing that strikes us. In fact, the massive height of the nave although typical of most churches in New Orleans is particularly stunning (fig 2) 3 Fig 2 The nave is lined with intricate arcading and 'triforium' windows so typically expansive enough for Gothic taste to permit huge amounts of natural light to swarm the interior. The arcading is layered on intricately de signed columns that incorporate the geometric designs so familiar within the Moorish style. There is also what is known as a Solomonic column (fig 3) that features a kind of corkscrew design. This style of column actually dates back to ancient Jerusalem and has become popularly used since because of its symbolic reference to the gates of paradise. Further adornments include chandeliers constructed of fine bronze, which again appear to be of Moorish style (fig 3). However, further

Microprocessor Architecture Essay Example | Topics and Well Written Essays - 1250 words

Microprocessor Architecture - Essay Example The Pioneer is intended as a 32-bit RISC processor. It has 32 general purpose registers which can be used for calculations. It can address 32 bit address space (4GB). On the other hand the MARIE architecture has a 16-bit CISC architecture. The Machine Architecture that is Really Intuitive and Easy, MARIE, was designed for the singular purpose of illustrating basic computer system concepts. While this system is too simple to do anything useful in the real world, a deep understanding of its functions will enable you to comprehend system architectures that are much more complex. Binary, twos complement data representation. Stored program fixed word length data and instructions. 4K words of word-addressable main memory, 16-bit data words, and 16-bit instructions 4 for the op-code and 12 for the address, a 16-bit arithmetic logic unit (ALU). Seven registers for control and data movement. Pioneer has an Input register size of size 32-bit and 32 possible outputs for out put. The â€Å"Y† bus may alternatively carry immediate data, created by a 16-bit value that may come from the instruction. Once the â€Å"X† and â€Å"Y† busses have data on them, any of the computational units my access that data and perform calculations on that data. Once the computational unit has accomplished the calculation, the result is placed on the â€Å"results† internal data bus, and a register in the register set may load the calculated value. The Address Generator is used to generate addresses, which can be used to access data within memory MEM [address]. It can be used as an index register. The address generator has the ability to adjust the index registers according to various controls and other registers (â€Å"Modify† registers) within the Address Generator. While MARIE has 8-bit input and 8-bit output register. Many have asked why should build an emulated MARIE computer when an excellent assembler, simulator, and data path simulator

Research Into Youth Gang Culture Criminology Essay

Research Into Youth Gang Culture Criminology Essay A] Conduct your own research into youth gang culture. This research analyse the myths realities surrounding the highly problematic of youth gang in the UK. There is little research into the gang problem in the UK which has led to the large amount of research from the USA being involved to the UK. Key areas in this research were the analysis of different theories of youth gangs, the use of different subcultural concept in order to explain the emergence of youth gangs the impact of the press in changing public perception and government reaction, as the effect this has on official statistic. Hallsworth Young [2008] stated the gangs was for the first time clearly linked to the problem of urban violence and use of weapon in the UK suggested a Home Office report 2008, published following the rise in gang related incidents, which were the focus of much media attention. The Centre for Social Justice [2009] went on the state that media coverage has at times been suggestive of an expansion in gang related youth violence, extraordinary headlined television documentaries relating to gang violence death as well the involvement of girl gangs in the UK. Indicated that the issue is similar to that in the USA where the common perception is that this group are armed, dangerous ready to kill [Hallworst Young 2008]. Every time a youth is killed as a result of street violence, particularly when it involves knives or guns, questions are sent through the press as to whether the incident was linked to gangs [Hallsworth Young 2008]. However, it is stated that much of the press report in the UK are not backed by practical evidence of a large scale issues. The issue with defining gangs, the use of word gang can lead to events which can not be gang related defined as such [Marshall 2005]. The Greater Vancouver Gang study identified group who were recorded by the police as a gang even though they did not consider themselves this way [Gordon 2000]. Bullock Tilley [2002] stated that almost all who belong to informal group might be deemed to be gang member even if they are not criminal, despite previous studies such as Willmotts [1966] survey in East London showing that it is usual for youths of eighteen to go around in small group [Farrington West 1977]. Hallsowrth Young [2008] stated that there is a small consensus on what groups are gang and this stay the subject of on going debate. They explained that were 3 level of delinquent collective [Marshall 2005] Peer group are the most common, implicated in petty but unorganised crime. Gangs who are more likely to use deadly violence protect their territory than other street groups [Sanders 1994 cited in Bennett Holloway 2004]. Organised Criminal group who operate black markets, where specific view crime their regular occupation [Marshall 2005] and where youths can operate as part of the adult organised groups [Stelfox 1998]. Peter Stelfox found it difficult to find a generally agreed theory of a gang which was applicable to the UK issues [Pitts 2007]. He stated on a broad theory to suit the aims of his research , showing that a gang criminal purpose, but uses violence the threat fear of violence to further a criminal purpose , but excluding football hooligans terrorist [Stelfox 1998]. This theory Stelfox found a national total of 72 gangs in the UK. Those using alternative theories for example the Metropolitan Police [2006 cited in Pitts 2007] recorded169 youth gangs in London and Hallsworth Youngs [2008] discovered state that gang membership in the UK is no more than 37% of the youthful population. The problem that will arise when trying to identify youth gang using different theories The majority of young people are law-abiding citizens who a valuable contribution to community. Young people are disproportionately more likely to be the victim of violence to scary about the impact in their live. British Crime Survey evaluate that young men from 16 to 24, for example are more than four times more likely to become the victim of violent crime than general population and there were over 500,000 violent incident against 10 to 15 years olds in 2010/11 A young persons risk of being a victim of violence is heavily determined by their age, sex class. Family elements like parental neglect or violence are important, but so too are broader community elements like local attitudes to the illegal economy or high crime rates. What elements lead young people to commit serious violence are: Early childhood neglect abuse Ill health in the family Parental violence drug addiction School exclusion early conduct disorders Violent victimisation repeated hospital visit Early involvement in local gangs Gang Membership also drives serious violence. Data on gangs is not systematically recorded in the UK, evidence suggest that gang membership is relatively rare. Youth surveys have found that 2 to 7% of youth people aged between 10 19 years report being a member of a gang. Gang played a small, but significant role in the riots earlier this year. Across the 10 Forces where the disorder was most prevalent a total of 417 arrestees during the event of the disorder were reported to be members of gangs 13% of the total. _____________________________

Comparing Teens in Catcher in the Rye, Tears of a Tiger, and Whirligig :: comparison compare contrast essays

Problem Teens in Catcher in the Rye, Tears of a Tiger, and Whirligig The Catcher in the Rye, J.D. Salinger's novel set in the 1950s, told the story of sixteen-year-old Holden Caulfield. Deciding that he's had enough of Pencey, his fourth school that he'd failed, he goes to Manhattan three days before his scheduled return to home, not wanting to inform his parents that he'd been expelled and sent back. He explores the city, calls up some old friends, gets nicked by the elevator operator, and gradually becomes bitter about the world and people. He then visited his sister Phoebe. After fleeing from the house of Mr. Antolini, his former English teacher, because of mistaking his actions for a homosexual overture, Holden went to Phoebe's school and sent her a note telling her he was leaving home and to meet him at the museum. When Phoebe arrived, Holden angrily refused her request to take her with him and she ignored to speak to him. He then took her across the park to a carousel, bought her a ticket and watched her ride. Holden ended his narrat ive here, telling the reader that he was not going to tell the story of how he went home and got "sick". He planned to go to a new school in the fall and was cautiously optimistic about his future. Tears of a Tiger, Sharon M. Draper's compelling novel about the death of high school basketball star Rob Washington in an automobile accident, exposed the dangers of drinking and driving with its deadly consequences. Andy Jackson was driving the car that crashed, killing his best friend Rob, and the cost was more than he could bear. Months later, he still couldn't stop blaming himself, even after the constant comforts from his friends and sessions with a psychologist. Drowning in his guilt, he turned away from his family, his friends, his girlfriend and his future. Whirligig, Paul Fleischman's beautifully constructed novel that spun the complex story of Brent Bishop and his task to memorialize Lea, an unfortunate teen who crossed his path when he tried to kill himself in a car. To keep Lea's spirit alive, Brent was assigned to create four whirligigs that resembled Lea, and put them in the four corners of the United States.

Passenger Satisfaction Survey

Passenger Satisfaction Survey Report and Benchmarking of Performance Standards Hkkjrh; jsy ifjogu izcU/ku laLFkku y[kuA Indian Railways Institute of Transport Management Lucknow July 2012 PASSENGER SATISFACTION SURVEY REPORT AND BENCHMARKING OF PERFORMANCE STANDARDS Dr. KALPANA DUBE Senior Professor (Finance & PPP) Assisted by Kishor Mehta, CMI, IRITM Ankit Tandon, RA, IIM Lucknow July 2012 Indian Railways Institute of Transport Management Lucknow Government of India – Ministry of Railways DisclaimerThe findings contained in the Passenger Satisfaction Survey Report are meant to focus on those Service related areas which require better attention by the Service Providers. Like all other Surveys these represent only an indicative checklist of areas of action and reforms and are by no means exhaustive and fully descriptive. The Survey was restricted to some cities of northern parts of the Country, the observations and findings get limited to that extent and may not apply ipso fact o to all Indian Railway Passenger Services. PPP Knowledge Center, Copyright  ©IRITMMESSAGE FROM THE DIRECTOR PPP knowledge centre was setup at IRITM in 2008. IRITM has a Memorandum of Understanding (MoU) with IIM Lucknow, for writing Research Papers, Case Studies and assimilating research findings into comprehensive periodic reports to be used for improving training inputs. This is the 4th publication of the Centre. The earlier 3 publications :1. Ideas on PPP, Dr. Kalpana Dube, Sr. Prof. (Fin. & PPP), IRITM & Ashish Shukla 2. A Handbook on Project Finance & PPP Terminology, Dr. Kalpana Dube, Sr. Prof. (Fin. & PPP), IRITM & Ankit Tandon 3.Studying the Efficacy of an Airport Modernization Concession Agreement, Dr. Kalpana Dube, Sr. Prof. (Fin. & PPP), IRITM The above publications have been well received not only by the Railways but even outside in the Government, Private Sector and Educational Institutions. Indian Railways is the life line of the nation. It has been instrumental in bringing about a social, cultural and economic revolution in our society and has been a strong uniting and integrating force. Despite being a monopoly in passenger services which are highly subsidized, can it afford to have a dissatisfied customer?To keep the nation moving and the customers happy, our net social service obligations in 2010-11 constituted 17. 57% of total expenditure. Analysis of profitability of Coaching Services showed a loss of 21,324 crores to which net suburban losses in Chennai, Kolkatta and Mumbai contributed Rs. 2364 crores. Other factors have also accelerated the situation which include low second class ordinary fares non suburban commuters and concession in fare extended to various categories. No other transport sector today is offering rates which could compete with the Railways.Despite so much of effort if we are still unable to keep our Customer satisfied there certainly seems to be some communication gap between us and the Customer. In order to asses th at gap IRITM conducted a â€Å"Passenger Satisfaction Survey† on the Northern, North Central and North Eastern Railway, the result of which are summarized in the publication. We hope the results would allow us the Railway personnel to introspect about our â€Å"Customer Demand† and initiate us to give a better service and be more vocal in showing our concern for keeping our Customer Happy. Ashima Singh Director IRITM Lucknow July 2012FOREWORD Passenger Amenities and provision of certain essential as well as desirable features on Railway stations as well as on-board train services continually engage the attention of policy makers in the Railway Board as well as the Field Officers in the Zones and Divisions. The ground level scenario at major stations in the country differs in terms of scope as well as its perceived usefulness by the Railway Passengers. The present survey was designed to get a comprehensive feedback on 37 different service parameters related to passenger conveniences and station facilities.While the objective assessment fields were readily responded to by most passengers the open ended questions did not elicit detailed replies and were perfunctory. The perception gap between Passenger responses and Railway Officers’ responses also highlighted some interesting differences. Illumination at Stations, Signage and Clarity of Train Announcements and Booking Counter experience have got very favorable responses. The deficiency areas which were most reported on were cleanliness on platforms and train toilets, late running of trains as well as unauthorized people in compartments.What must be emphasized here is that none of these areas actually require capital expenditure or investments or repeated policy directives. They just require vigilantism, active supervision and better coordination among the service providers within the various departments. A standard protocol of maintenance, cleanliness and supervision functions needs to be wo rked upon just like the various service related parameters put in operation at the newly developed and modernized airports. (Please refer Annexure). This is a standard checklist of service parameters insisted upon by Delhi International Airport Limited (DIAL).A similar drill would go a long way in ensuring better services on our premium stations especially A1, and A categories. The booklet has been designed in such a manner that passenger responses can be very easily understood through use of colorful graphics and simple data presentation, however the larger question which needs to be addressed is that can we provide station and on board housekeeping services which are game changers and path breaking at the same time? Which reflect a paradigm shift in the way Passenger Services are traditionally being offered by Indian Railways.Perhaps the new Station Development Corporation announced recently may introduce sweeping changes to radically alter the present system of addressing Passeng er Amenities and general conveniences to be made available to the public. The Station Development Corporation has been conceived with the primary objective of augmenting and improving passenger related amenities at stations. All the issues highlighted in the current survey would perhaps get addressed if fast tracking the activities of the Station Development agency can show visible early results.The areas of action being well designed concourses, high end waiting spaces, easy access with disabled friendly options for station premises, congestion free platforms, modern catering facilities etc. The Report has been made more useful by adding edited versions of the comprehensive, pan-India Passenger Service Surveys and Station Cleanliness Surveys conducted by the CAG (Railways) in the last few years. In addition, some additional literature and visuals of world class stations have been added to give a feel of what the future may look like in the days to come for Passenger Amenities and S ervices in Modernized Railway Stations.The Report has also been substantiated with identifying certain important performance benchmarks, using examples from the Aviation Sector. Performance benchmarking and improving customer perception are important milestones in improving station premises and passenger services beyond the conventional targets to the next level. A level which is path breaking and futuristic in its vision and implementation. If the checklist of the 37 parameters used in this study as well as the findings contained in the Audit Reports are read and comprehended by the Railway officers responsible for these functions, the purpose of the survey would be fulfilled.However, it may be useful to reiterate that station maintenance procedures must follow the KISNE principle i. e. Keep It Smart Neat and Efficient. Also while we cannot promise the moon to our customers we must ensure that what we do promise we deliver at all times with 100% efficiency and Zero Failures. These are achievable because we have a long experience of managing stations and procedures are well laid out. What is perhaps needed is a well established drill of adhering to a standard protocol of Station and Train Maintenance Practices and not allow the drill to falter even for a day.A well thought strategy, precision in execution and applying Six Sigma principles for not deviating from the Standard Maintenance and Supervision Protocol would go a long way establishing a New Order which is easy to replicate and easy to follow. Dr. Kalpana Dube Senior Professor IRITM Lucknow July 2012 The more you engage with customers the clearer things become and the easier it is to determine what you should be doing. —-John Russell CONTENTS SN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 TopicsObjectives of the Passenger Survey Criteria and Methodology Sample Size/Target Respondents Passenger Survey Findings Response by Railway Officers Suggestions for Proactive Action Comparison of General Public & Railway Officers’ Response Perception Gap – Between the General Public as Rail Users and Railway Officers as Rail Users Graphical Representation of the Findings Strategy For Promoting Indian Railways Image And Train Travel Experience – Some Suggestions Benchmarking & Performance Assessment Measures Sub Report One: Sample Service Quality Specifications For Delhi International Airport Ltd. DIAL) Conceptual Background for Railway Stations as Profit & Investment Centers Sub Report Two: CAG Recommendations on Passenger Services in Indian Railways 2008-09 Sub Report Three: CAG Recommendations on Cleanliness and Sanitation on Indian Railways 2007-08 Annexure 1: Citizen Charter on Passenger Services of Indian Railways Annexure 2: Questionnaire Used for the Passenger Satisfaction Survey for IR Performance & Service Standards Page No. 1 1 2 3 5 6 7 9 10 – 25 26 27 28 33 38 40 42 46Passenger Satisfaction Survey Report and Benchmarking of Performance Standards Obj ectives of the Passenger Survey †¢ †¢ To review the facilities provided to the passengers right from ticket booking to the on-board travel experience in the trains To asses if facilities provided in trains were adequate and effectively maintained or not, from the point of Passenger Satisfaction in Station Maintenance Practices. To know the priority areas so that these can be strengthened to optimize passenger satisfaction.To asses the overall travel experience of the passengers in the Indian Railways and their perception of the organization. †¢ †¢ Criteria and Methodology An open ended questionnaire with about 37 parameters was prepared and survey was conducted with the help of three field executives provided by the Indian Institute of Management (IIM) Lucknow. The survey was conducted over a period of ten days through direct contact and filling up of the questionnaire by on-board passengers of all the Travel Classes (AC, 2nd Sleeper).The routes identified for th e survey were mainly on the Northern part of the country Lucknow – New Delhi – Lucknow, Lucknow – Gorakhpur – Lucknow, Lucknow – Varanasi – Lucknow, Lucknow – Allahabad – Lucknow, Lucknow – Kanpur – Lucknow, Lucknow – Moradabad – Lucknow, Lucknow – Firozpur – Lucknow. All the Stations surveyed belonged to A-1 and A category. 1 Passenger Satisfaction Survey Report and Benchmarking of Performance Standards Sample Size/Target Respondents The sample size of the survey was around 700 passengers which included 100 Railway Officers as well.The general passengers age profile was from 15 years to 65 years with maximum response coming in from the young adults/youth i. e. 26-35 years of age. About 28% were female respondents and balance were males. Quality in a service or product is not what you put into it. It is what the client or customer gets out of it. ——–Peter F. Drucker 2 Passenger Satisfaction Survey Report and Benchmarking of Performance Standards Passenger Survey Findings Top Efficiencies 1. Illumination & Signages 2. Availability of Porters (Coolies) at the Station 2.Booking Clerk Competency & Behaviour 3. Clarity of Announcement at Stations Top Deficiencies 1. Cleanliness of Toilets 2. Unauthorized Vendors & Passengers 2. Cleanliness of Platforms 3. Late Running of Trains Top Three Concerns/Priority Areas 1. Punctuality 2. Quality of services 3. Safety Satisfactory Services (Rated as Good) 1. Ambience of Waiting Rooms/Rest Rooms 2. Seating, Water, Trolley facilities at the Platform 3. Pricing of Food 4. Linen/Bedroll Cleanliness 5. Fans and Lights in the Trains 3 Passenger Satisfaction Survey Report and Benchmarking of Performance StandardsOther Findings of the Survey †¢ More than 60% of the people have used IT Enabled services such as Internet Ticketing, Enquiry Kiosks, Touch Screens, etc. 64% of the passengers surveyed confirmed that t hey have seen service improvements in the Railways in the last five years. 31 % of the passengers surveyed are satisfied with the Railway Amenities/ facilities. 35 % of the passengers surveyed think that Railways are giving Value for Money for the services provided. 47 % of the passengers surveyed rated Overall Services provided by the Railways as Good †¢ †¢ †¢ Your most unhappy customers are your greatest source of learning. ——Bill Gates 4 Passenger Satisfaction Survey Report and Benchmarking of Performance Standards Response by Railway Officers Top Efficiencies 1. Booking Clerk Competency & Behaviour 2. Quality & Quantity of Food made available 3. Clarity of Announcement at Stations Top Deficiencies 1. Coach/Toilets occupied by Unauthorized Passenger & Vendors 2. Handling of Theft Cases 3. Cleanliness of Toilets/Coaches Top three Concerns/Priority Areas 1. Quality of Service 2. Punctuality 3. CleanlinessSatisfactory Services (Rated as Good) 1. Water in the Coaches 2. Seating, Water, Trolley facilities at the Platform 3. Cleanliness of Platform 4. Ambience of Waiting Rooms/Rest Rooms 5. Illumination & Signages 5 Passenger Satisfaction Survey Report and Benchmarking of Performance Standards Other Findings of the Survey †¢ More than 70% of the Railway Officers have used IT Enabled services such as internet ticketing, enquiry kiosks, touch screens, etc. 94% of the Railway Officers surveyed confirmed that they have seen service improvements in the Railways in the last five years. 7 % of the Railway Officers surveyed are satisfied with the Railway Amenities/ Facilities. 86 % of the Railway Officers surveyed think that Railways giving Value for Money for the services provided. 85 % of the Railway Officers surveyed rated Overall Services provided by the Railways as Good. †¢ †¢ †¢ †¢ 6 This handbook on Passenger Satisfaction Survey and Benchmarking of Performance Standards has been compiled using the results obtai ned in a 15 day extensive Passenger Survey launched by IRITM PPP Knowledge Centre in association with IIM Lucknow.The survey was in the northern part of the country covering A-1 and A category stations. 700 responses were obtained on 37 different passenger service parameters under nine categories ranging from Point of Sale to On-board Facilities to IT based Passenger Transactions. These have been compiled in easy to read, colourful graphics in this Report. The Report has been made more useful by adding edited versions of the comprehensive, pan-India Passenger Service Surveys and Station Cleanliness Surveys conducted by the CAG (Railways) in the last few years.In addition, some additional literature and visuals of world class stations have been added to give a feel of what the future may look like in the days to come for Passenger Amenities and Services in Modernized Railway Stations. This handbook would be of use not only to IRTS Probationers but also to all frontline Managers and S taff in Indian Railways responsible for Station Maintenance, Sanitation and Passenger Amenities. The handbook can also be accessed on the IRITM website www. iritm. indianrailways. gov. in.A customer is the most important visitor on our premises, he is not dependent on us. We are dependent on him. He is not an interruption in our work. He is the purpose of it. He is not an outsider in our business. He is part of it. We are not doing him a favor by serving him. He is doing us a favor by giving us an opportunity to do so. — Mahatma Gandhi Hkkjrh; jsy ifjogu izcU/ku laLFkku y[kuA Indian Railways Institute of Transport Management Lucknow Hardoi By-Pass Road, P. O. Manak Nagar, Lucknow – 226 011 Ph. : 0522-2471961, Fax: 0522-2473929, website: www. iritm. indianrailways. gov. in

Essay on Without Freud, there would be no SurrealismEssay Writing Service

Essay on Without Freud, there would be no SurrealismEssay Writing Service Essay on Without Freud, there would be no Surrealism Essay on Without Freud, there would be no SurrealismI Introduction – the emergence of Cubism based on findings of Freud, whose psychoanalysis had made a breakthrough not only in the development of psychology but also art.Thesis statement: The impact of Freud’s theory of psychoanalysis affected the development of psychology but also had a profound impact on artists, who had changed their worldview and perception of the world and humans under the impact of Freud by focusing their attention on the revelation of subconscious through their art that apparently contributed to the rise of Surrealism.II Background of Freud’s theory and its impact on art  Ã‚  Ã‚  Ã‚   A Freud’s psychoanalysis theory1 Freud makes discoveries in the field of psychology revealing the existence of subconscious2 Freud views the development of humans as the struggle of the subconscious and conscious, ego and Id3 Freud has had a considerable effect on psychology, science and art  Ã‚  Ã ‚  Ã‚   B The development of art in the time of Freud’s theoretical developments  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   1 The rise of modernist movements determined by experiments of artists in the field of art and searches of new sources and means of expressions as well as new ideas, styles and directions in the development of the visual art.  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   2 The emergence of Freud’s theory attracted artists to the problem of subconscious encouraging experiments with visual forms and stylesIII The Rise of Surrealism  Ã‚  Ã‚  Ã‚   A The impact of Freud’s subconscious on SurrealismThe impact of Freud’s subconscious on Surrealism was determinant because it attracted artists to the exploration of the subconscious world, which they could not trace in the regular, real life.  Ã‚  Ã‚  Ã‚   B The distinct feature of Surrealism was the focus on illogical, emotional depiction of various visual imagesWorks of Surrealists intended to mirror their subco nscious because in such a way, they attempted to free their emotions and feelings and, thus, depict the reality as it really is  Ã‚  Ã‚  Ã‚   C The Surrealist art as intent to overcome social biases and conventional view on life and artThe Surrealist art was intended to overcome social biases and conventional view on life and art. They experimented with visual representation relying heavily on their emotions in an attempt to uncover their internal world and convey it to the audienceIV Key contributions of Freud to Surrealism  Ã‚  Ã‚  Ã‚   A Surrealism would be impossible without understanding of the concept of subconscious  Ã‚  Ã‚  Ã‚   B Freud’s theory contributed to the rise of Surrealist belief that there is a different reality compared the one physically observed by artist and the publicV ConclusionFreud had created the theoretical ground for the emergence of Surrealism, while surrealist artists find sources of inspiration in his theory and attempted to free their s ubconscious through illogical, surrealistic imagery.

How to Create Believable Characters in Short Stories

How to Create Believable Characters in Short Stories In the creation of a short story, one only has a very short window in which to convey the full range of a character. A short story is typically about five thousand words or less which is roughly about ten pages. Within those ten pages you need to be able show, not just the character but also the setting, plot, and the different scenarios leading up to the climax. How do you create a character in depth when you only have such a limited amount of words to do so with? By utilizing every single sentence you write to show things about the character. Don’t spend valuable words describing a character when you can show the character through dialogue and actions. Let’s say your heroine has long black hair. Saying that she has long black hair would describe her, but in a wasteful way since that statement does nothing but tell the reader that she has long black hair. Instead, why not show her impatiently pulling on her hair as the strands stubbornly coiled around her glistening arms like sinuous black snakes. With this second description, you’re not only telling the reader that she has long black hair but you’re also telling them that she’s in a hurry and is impatient with how her hair is sticking to her arms. Her arms are wet, could be raining or perhaps it’s sweat. The fact that strands of her hair are able to coil around her arms tells the reader that it’s pretty long. Long enough to tangle around her arms. Using black snakes as a symbolism not only tells the reader that she has blac k hair but also sets the stage for something suspenseful to happen. In a short story there’s only so many words to set the stage for climax so they need to be carefully chosen in order to convey multiple meanings. Make dialogue and attitude count for your character. Everything that’s said needs to show who and what the character is all about. Using a dialect can tell the reader where the character comes from. Create attitude for the character through how they talk. Use slang. If one is trying to show a nervous man, there’s no need to come straight out and say that he’s nervous and stammers a lot. Show it in his actions and the way he talks. Describe him looking down at his feet with hunched shoulders, trying to get a sentence out. Show him breaking up the words such as, â€Å"Sh†¦she, umm, she went over th†¦there, that way.† Have him push his glasses up on his nose with trembling fingers and tilt his head slightly to peer at the other person through his lens. These kinds of statements keep the story moving along while imparting a tremendous amount of information about this particular character. Immediately one starts to sympathize with this guy. The writer shows him either as a painfully nervous character or someone who is scared to death of something that’s happening or going to happen. It makes the reader want to keep going so they can find out exactly where the cause of his discomfort is coming from. Your goal as a short story writer is to create characters that are believable to the reader without them ever knowing that you’re telling them. Make it so that they feel as if they’re figuring it all out and picturing them in their minds. By doing so, you’ll carry the reader right along to the end of the tale.

Two behavioural finance problem sets related to Temporal Discounting Assignment

Two behavioural finance problem sets related to Temporal Discounting and Bayesian Learning vs Reinforcement Learning in Financial Decision making - Assignment Example The exponential discounting graph has a positive slope due to its positivity index. This person should sign an agreement in period zero due to income effect and substitution effect. The high interest rate increases income a certain amount of time. Therefore, increase in consumption during the first and second period makes the income effect of the borrower to be negative in the period. Additionally, due to substitution effect, the gross interest rate is relative to consumption price during period zero compared to period 1 and 2 (Nielsen, 2005). Hence, it will be more expensive in the first and second period compared to period zero. As such, for a person, a rise in interest rate in the first or second period may rise or reduce the rate during period zero. Assuming that Mr. Spout has an expected payout of $1 when he invests in stock A, Mr. Spout will not choose the guaranteed stock A. Stock has an expected uncertainty of 1/3; therefore, Mr. Spout will take his chances and invest in stock B. He will not have preference between investing in either stock A or investing in stock B (Forbes, 2009). To state this in a different way, Mr. Spout will later select the investment that has a higher expected return. Mr. Spout, will invest in stock B in future, since he does not consider taking into account the investment risk in his decision. As a Bayesian learner, Mr. Spout decision will be influenced by uncertainty knowledge and the time is linked through the process of learning of the stocks. As a risk neutral investor, Mr. Spout will be indifferent between investing in stock A or in Stock B. Since he has an experience in stock A, Mr. Spout will invest in stock B. As a Bayesian investor, Mr. Spout experimented in the first period and observed the results. Therefore, he will invest in stock B due to its uncertainty element attached to the stock. He will not have preference between

Challenges of Information Technology Research Paper

Challenges of Information Technology - Research Paper Example Moreover, data management with enhanced high-tech security is an expensive undertaking. Network management in the organizational setting experiences both the positive and negative aspects of improved technology. Improved networks have made communication efficient and effective in and out of the organizational setting (Kuhn, 2008). Employees have been quick to exploit this realization, resulting in network management challenges. Use of smartphones and other devices on company networks have increased network usage costs, necessitated time to time maintenance, and threatened network security. To address these challenges, a company would need to have its employees subscribe to its network, or limit its network usage on personal smartphones and other devices. The company can also allow its employees to use their personal devices on its network, with a requirement to meet maintenance fees from time to time. Finally, where network security is threatened, administrative rights should be used to monitor and control company network usage by employees (Klein,